Network Working Group J.L. LeRoux (Editor) Internet DraftRoux, Ed. Request for Comments: 5088 France TelecomIntended Status: StandardCategory: Standards TrackExpires: April 2008J.P.Vasseur (Editor)Vasseur, Ed. Cisco System Inc.YuichiY. Ikejiri NTT CommunicationsRaymondR. Zhang BTInfonet OctoberDecember 2007 OSPF Protocol Extensions for Path Computation Element (PCE) Discoverydraft-ietf-pce-disco-proto-ospf-08.txtStatus ofthisThis MemoBy submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents ofThis document specifies an Internet standards track protocol for the InternetEngineering Task Force (IETF), its areas,community, andits working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents validrequests discussion and suggestions fora maximumimprovements. Please refer to the current edition ofsix monthsthe "Internet Official Protocol Standards" (STD 1) for the standardization state andmay be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The liststatus ofcurrent Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The listthis protocol. Distribution ofInternet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Copyright Notice Copyright (C) The IETF Trust (2007). All rights reserved.this memo is unlimited. Abstract There are various circumstances where it is highly desirable for a Path Computation Client (PCC) to be able to dynamically and automatically discover a set of Path Computation Elements (PCEs), along with information that can be used by the PCC for PCE selection. When the PCE is a Label Switching Router (LSR) participating in the Interior Gateway Protocol (IGP), or even a server participating passively in the IGP, a simple and efficient way to announce PCEs consists of using IGP flooding. For that purpose, this document defines extensions to the Open Shortest Path First (OSPF) routing protocol for the advertisement of PCE Discovery information within an OSPF area or within the entire OSPF routing domain.Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].Table of Contents 1.Terminology.................................................3Introduction ....................................................2 2.Introduction................................................4Terminology .....................................................4 3.Overview....................................................5Overview ........................................................5 3.1. PCE DiscoveryInformation...................................5Information ..................................5 3.2. FloodingScope..............................................5Scope .............................................5 4. The OSPF PCEDTLV...........................................6TLV ...............................................6 4.1. PCE-ADDRESSSub-TLV.........................................7Sub-TLV ........................................7 4.2. PATH-SCOPESub-TLV..........................................8Sub-TLV .........................................8 4.3. PCE-DOMAINSub-TLV.........................................10Sub-TLV ........................................10 4.4. NEIG-PCE-DOMAINSub-TLV....................................11Sub-TLV ...................................11 4.5. PCE-CAP-FLAGSSub-TLV......................................11Sub-TLV .....................................12 5. Elements ofProcedure......................................13Procedure ..........................................13 6. BackwardCompatibility.....................................13Compatibility .........................................14 7. IANAConsiderations........................................14Considerations ............................................14 7.1. OSPFTLV...................................................14TLV ..................................................14 7.2. PCE Capability Flagsregistry..............................14Registry .............................14 8. SecurityConsiderations....................................15Considerations ........................................15 9. ManageabilityConsiderations...............................15Considerations ...................................16 9.1. Control of Policy andFunctions............................15Functions ...........................16 9.2. Information and DataModel.................................15Model ................................16 9.3. Liveness Detection andMonitoring..........................15Monitoring .........................16 9.4. Verify CorrectOperations..................................16Operations .................................16 9.5. Requirements on Other Protocols and FunctionalComponents...............................................16Components ................................................16 9.6. Impact on NetworkOperations...............................16Operations ..............................17 10.Acknowledgments............................................16Acknowledgments ...............................................17 11.References.................................................16References ....................................................17 11.1. NormativeReferences.......................................16 11.2. Informative References.....................................17 12. Editor's Addresses.........................................17 13. Contributors' Addresses....................................18 14. Intellectual Property Statement............................18 1. Terminology ABR: OSPF Area Border Router. AS: Autonomous System. IGP: Interior Gateway Protocol. Either of the two routing protocols Open Shortest Path First (OSPF) or Intermediate System to Intermediate System (ISIS). Intra-area TE LSP: A TE LSP whose path does not cross an IGP area boundary. Intra-AS TE LSP: A TE LSP whose path does not cross an AS boundary. Inter-area TE LSP: A TE LSP whose path transits two or more IGP areas. That is a TE LSP that crosses at least one IGP area boundary. Inter-AS TE LSP: A TE LSP whose path transits two or more ASes or sub-ASes (BGP confederations). That is a TE LSP that crosses at least one AS boundary. LSA: Link State Advertisement. LSR: Label Switching Router. PCC: Path Computation Client. Any client application requesting a path computation to be performed by a Path Computation Element. PCE: Path Computation Element. An entity (component, application, or network node) that is capable of computing a network path or route based on a network graph, and applying computational constraints. PCE-Domain: In a PCE context this refers to any collection of network elements within a common sphere of address management or path computational responsibility (referred to as a "domain" in [RFC4655]). Examples of PCE-Domains include IGP areas and ASes. This should be distinguished from an OSPF routing domain. PCEP: Path Computation Element Protocol. TE LSP: Traffic Engineered Label Switched Path. 2.References .....................................17 11.2. Informative References ...................................18 1. Introduction [RFC4655] describes the motivations and architecture for a Path Computation Element (PCE)-based path computation model for Multi-Protocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineered Label Switched Paths (TE LSPs). The model allows for the separation of the PCE from a Path Computation Client (PCC) (also referred to as a non co-located PCE) and allows for cooperation between PCEs (where one PCE acts as a PCC to make requests of the other PCE). This relies on a communication protocol between a PCC and PCE, and also between PCEs. The requirements for such a communication protocol can be found in [RFC4657], and the communication protocol is defined in [PCEP]. The PCE architecture requires that a PCC be aware of the location of one or more PCEs in its domain,and also,and, potentially, of PCEs in other domains, e.g., in the case of inter-domain TE LSP computation. A network may contain a large number of PCEs, each with potentially distinct capabilities. In such acontextcontext, it is highly desirable to have a mechanism for automatic and dynamic PCE discovery that allows PCCs to automatically discover a set ofPCEsPCEs, along with additional information about each PCE that may be used by a PCC to perform PCE selection. Additionally, it is valuable for a PCC to dynamically detect new PCEs, failed PCEs, or any modification to the PCE information. Detailed requirements for such a PCE discovery mechanism are provided in [RFC4674]. Note that the PCE selection algorithm applied by a PCC is out of the scope of this document. When PCCs are LSRs participating in the IGP (OSPF or IS-IS), and PCEs are either LSRs or servers also participating in the IGP, an effective mechanism for PCE discovery within an IGP routing domain consists of utilizing IGP advertisements. This document defines extensions to OSPFv2 [RFC2328] and OSPFv3 [RFC2740] to allow a PCE in an OSPF routing domain to advertise itslocationlocation, along with some information useful to a PCC for PCEselectionselection, so as to satisfy dynamic PCE discovery requirements set forth in [RFC4674]. Generic capability advertisement mechanisms for OSPF are defined in[OSPF-CAP].[RFC4970]. These allow a router to advertise its capabilities within an OSPF area or an entire OSPF routing domain. This document leverages this generic capability advertisement mechanism to fully satisfy the dynamic PCE discovery requirements. This document defines a new TLV (named the PCE Discovery(PCED) TLV)(PCED)) to be carried within the OSPF Router Information LSA([OSPF-CAP]).([RFC4970]). The PCE information advertised is detailed in Section 3. Protocol extensions and procedures are defined in Sections 4 and5. The OSPF extensions defined in this document allow for PCE discovery within5. The OSPF extensions defined in this document allow for PCE discovery within an OSPF routing domain. Solutions for PCE discovery across AS boundaries are beyond the scope of this document, and are for further study. 2. Terminology ABR: OSPF Area Border Router. AS: Autonomous System. IGP: Interior Gateway Protocol. Either of the two routing protocols, Open Shortest Path First (OSPF) or Intermediate System to Intermediate System (IS-IS). Intra-area TE LSP: A TE LSP whose path does not cross an IGP area boundary. Intra-AS TE LSP: A TE LSP whose path does not cross an AS boundary. Inter-area TE LSP: A TE LSP whose path transits two or more IGP areas. That is, a TE LSP that crosses at least one IGP area boundary. Inter-AS TE LSP: A TE LSP whose path transits two or more ASes or sub-ASes (BGP confederations). That is, a TE LSP that crosses at least one AS boundary. LSA: Link State Advertisement. LSR: Label Switching Router. PCC: Path Computation Client. Any client application requesting a path computation to be performed by a Path Computation Element. PCE: Path Computation Element. An entity (component, application, or network node) that is capable of computing a network path or route based on a network graph and applying computational constraints. PCED: PCE Discovery. PCE-Domain: In a PCE context, this refers to any collection of network elements within a common sphere of address management or path computational responsibility (referred to as a "domain" in [RFC4655]). Examples of PCE-Domains include IGP areas and ASes. This should be distinguished from an OSPF routing domain.SolutionsPCEP: Path Computation Element communication Protocol. TE LSP: Traffic Engineered Label Switched Path. TLV: Type-Length-Variable data encoding. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. IS-IS extensions for PCE discoveryacross AS boundariesarebeyond the scope of this document, and for further study.defined in [RFC5089]. 3. Overview 3.1. PCE Discovery Information The PCE discovery information is composed of: - The PCE location: an IPv4 and/or IPv6 address that is used to reach the PCE. It is RECOMMENDED to use an address that is always reachable if there is any connectivity to the PCE; - The PCE path computation scope (i.e., intra-area, inter-area, inter-AS, or inter-layer); - The set of one or more PCE-Domain(s) into which the PCE has visibility and for which the PCE can compute paths; - The set of zero,oneone, or more neighbor PCE-Domain(s) toward which the PCE can compute paths; - A set of communication capabilities (e.g., support for request prioritization) and path computation-specific capabilities (e.g., supported constraints). PCE discovery informationisis, bynaturenature, fairly static and does not change with PCE activity. Changes in PCE discovery information may occur as a result of PCE configuration updates, PCE deployment/activation, PCE deactivation/suppression, or PCE failure. Hence, this information is not expected to change frequently. 3.2. Flooding Scope The flooding scope for PCE information advertised through OSPF can be limited to one or more OSPF areas the PCE belongs to, or can be extended across the entire OSPF routing domain. Note that some PCEs may belong to multiple areas, in which case the flooding scope may comprise these areas. This could be the case for an ABR, for instance, advertising its PCE information within the backbone area and/or a subset of its attached IGP area(s). 4. The OSPF PCED TLV The OSPF PCE Discovery TLV (PCED TLV) contains a non-ordered set of sub-TLVs. The format of the OSPF PCED TLV and its sub-TLVs is identical to the TLV format used by the Traffic Engineering Extensions to OSPF [RFC3630]. That is, the TLV is composed of 2 octets for the type, 2 octets specifying the TLV length, and a value field. The Length field defines the length of the value portion in octets. The TLV is padded tofour-octet4-octet alignment; padding is not included in the Length field (so athree octet3-octet value would have a length ofthree,3, but the total size of the TLV would beeight8 octets). Nested TLVs are alsofour-octet4-octet aligned. Unrecognized types are ignored. The OSPF PCED TLV has the following format: 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | // sub-TLVs // | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+Type To be defined by IANA (suggested value=5) LengthType: 6 Length: VariableValueValue: This comprises one or more sub-TLVs Five sub-TLVs are defined: Sub-TLV type Length Name 1 variable PCE-ADDRESS sub-TLV 2 4 PATH-SCOPE sub-TLV 3 4 PCE-DOMAIN sub-TLV 4 4 NEIG-PCE-DOMAIN sub-TLV 5 variable PCE-CAP-FLAGS sub-TLV The PCE-ADDRESS and PATH-SCOPE sub-TLVs MUST always be present within the PCED TLV. The PCE-DOMAIN and NEIG-PCE-DOMAIN sub-TLVs are optional. They MAY be present in the PCED TLV to facilitate selection of inter-domain PCEs. The PCE-CAP-FLAGS sub-TLV is optional and MAY be present in the PCED TLV to facilitate the PCE selection process. Malformed PCED TLVs or sub-TLVs not explicitly described in this document MUST cause the LSA to be treated as malformed according to the normal procedures of OSPF. Any unrecognized sub-TLV MUST be silently ignored. The PCED TLV is carried within an OSPF Router Information LSA defined in[OSPF-CAP].[RFC4970]. No additional sub-TLVs will be added to the PCED TLV in the future. If a future application requires the advertisement of additional PCE information in OSPF, this will not be carried in the Router Information LSA. The following sub-sections describe the sub-TLVswhichthat may be carried within the PCED sub-TLV. 4.1. PCE-ADDRESS Sub-TLV The PCE-ADDRESS sub-TLV specifies an IP address that can be used to reach the PCE. It is RECOMMENDED to make use of an address that is always reachable, provided that the PCE is alive and reachable. The PCE-ADDRESS sub-TLV is mandatory; it MUST be present within the PCED TLV. It MAY appear twice, when the PCE has both an IPv4 and IPv6 address. It MUST NOT appear more than once for the same address type. If it appears more thanonce,once for the same address type, only the first occurrence is processed and any others MUST be ignored. The format of the PCE-ADDRESS sub-TLV is as follows: 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 1 | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | address-type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | // PCE IP Address // | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ PCE-ADDRESS sub-TLV formatTypeType: 1LengthLength: 8 (IPv4) or 20 (IPv6) Address-type: 1 IPv4 2 IPv6 Reserved: SHOULD be set to zero on transmission and MUST be ignored on receipt. PCE IP Address: The IP address to be used to reach the PCE. 4.2. PATH-SCOPE Sub-TLV The PATH-SCOPE sub-TLV indicates the PCE path computation scope, which refers to the PCE's ability to compute or take part in the computation of paths for intra-area, inter-area, inter-AS, or inter- layer_TE LSPs. The PATH-SCOPE sub-TLV is mandatory; it MUST be present within the PCED TLV. There MUST be exactly one instance of the PATH-SCOPEsub- TLVsub-TLV within each PCED TLV. If it appears more than once, only the first occurrence is processed and any others MUST be ignored. The PATH-SCOPE sub-TLV contains a set of bit-flags indicating the supported path scopes, and four fields indicating PCE preferences. The PATH-SCOPE sub-TLV has the following format: 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 2 | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |0|1|2|3|4|5| Reserved |PrefL|PrefR|PrefS|PrefY| Res | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+TypeType: 2LengthLength: 4ValueValue: This comprises a 2-octetflagflags field where each bit represents a supported path scope, as well as four preference fields used to specify PCE preferences. The following bits are defined: Bit Path Scope 0 L bit: Can compute intra-areapathspaths. 1 R bit: Can act as PCE for inter-area TE LSPcomputationcomputation. 2 Rd bit: Can act as a default PCE for inter-area TE LSPcomputationcomputation. 3 S bit: Can act as PCE for inter-AS TE LSPcomputationcomputation. 4 Sd bit: Can act as a default PCE for inter-AS TE LSPcomputationcomputation. 5 Y bit: Can compute or take partintothe computation of paths across layers. PrefL field: PCE's preference for intra-area TELSPsLSP computation. PrefR field: PCE's preference for inter-area TELSPsLSP computation. PrefS field: PCE's preference for inter-AS TELSPsLSP computation. PrefY field: PCE's preference for inter-layer TELSPsLSP computation. Res: Reserved for future use. The L, R, S, and Y bits are set when the PCE can act as a PCE for intra-area, inter-area, inter-AS, or inter-layer TELSPs computationLSP computation, respectively. These bits are non-exclusive. When set, the Rd bit indicates that the PCE can act as a default PCE for inter-area TELSPsLSP computation (that is, the PCE can compute a path toward any neighbor area). Similarly, when set, the Sd bit indicates that the PCE can act as a default PCE for inter-AS TE LSP computation (the PCE can compute a path toward any neighbor AS). When the Rd and Sd bit aresetset, the PCED TLV MUST NOT contain aNEIG- PCE-DOMAINNEIG-PCE-DOMAIN sub-TLV (see Section 4.1.4). When the R bit is clear, the Rd bit SHOULD be clear on transmission and MUST beignoreignored on receipt. When the S bit is clear, the Sd bit SHOULD be clear on transmission and MUST be ignored on receipt. The PrefL, PrefR, PrefS, and PrefY fields are each three bits long and allow the PCE to specify a preference for each computation scope, where 7 reflects the highest preference. Such preferences can be used for weighted load balancing of path computation requests. An operator may decide to configure a preference for each computation scope at each PCE so as to balance the path computation load among them. The algorithms used by a PCC to load balance its path computation requests according to such PCE preferences is out of the scope of this document and is a matter for local or network-wide policy. The same or different preferences may be used for each scope. For instance, an operator that wants a PCE capable of both inter-area and inter-AS computation to bepreferedpreferred for use for inter-AS computations may configure PrefS higher than PrefR. When the L, R, S, or Y bits are cleared, the PrefL, PrefR, PrefS, and PrefY fields SHOULD respectively be set to 0 on transmission and MUST be ignored on receipt. Both reserved fields SHOULD be set to zero on transmission and MUST be ignored on receipt. 4.3. PCE-DOMAIN Sub-TLV The PCE-DOMAIN sub-TLV specifies a PCE-Domain (area or AS) where the PCE has topology visibility and through which the PCE can compute paths. The PCE-DOMAIN sub-TLV SHOULD be present when PCE-Domains for which the PCE can operate cannot be inferred by other IGPinformation,information: forinstanceinstance, when the PCE is inter-domain capable (i.e., when the R bit or S bit is set) and the flooding scope is the entire routing domain (see Section 5 for a discussion of how the flooding scope is set and interpreted). A PCED TLV may include multiple PCE-DOMAIN sub-TLVs when the PCE has visibility into multiple PCE-Domains. The PCE-DOMAIN sub-TLV has the following format: 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |Type=3Type = 3 | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Domain-type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Domain ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ PCE-DOMAIN sub-TLV formatTypeType: 3LengthLength: 8 Two domain-type values are defined: 1 OSPF Area ID 2 AS Number Domain ID: With the domain-type set to 1, this indicates the32 bit32-bit Area ID of an area where the PCE has visibility and can compute paths. With domain-type set to 2, this indicates an AS number of an AS where the PCE has visibility and can compute paths. When the AS number is coded in two octets, the AS Number field MUST have its first two octets set to 0..4.4. NEIG-PCE-DOMAIN Sub-TLV The NEIG-PCE-DOMAIN sub-TLV specifies a neighborPCE-domainPCE-Domain (area or AS) toward which a PCE can compute paths. It means that the PCE can take part in the computation of inter-domain TE LSPs with paths that transit this neighborPCE-domain.PCE-Domain. A PCED sub-TLV may include several NEIG-PCE-DOMAIN sub-TLVs when the PCE can compute paths towards severalneighbour PCE-domains.neighbor PCE-Domains. The NEIG-PCE-DOMAIN sub-TLV has the same format as the PCE-DOMAIN sub-TLV: 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 4 | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Domain-type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Domain ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ NEIG-PCE-DOMAIN sub-TLV formatTypeType: 4LengthLength: 8 Two domain-type values are defined: 1 OSPF Area ID 2 AS Number Domain ID: With the domain-type set to 1, this indicates the32 bit32-bit Area ID of aneighbourneighbor area toward which the PCE can compute paths. With domain-type set to 2, this indicates the AS number of a neighbor AS toward which the PCE can compute paths. When the AS number is coded in two octets, the AS Number field MUST have its first two octets set to 0. The NEIG-PCE-DOMAIN sub-TLV MUST be present at least once with domain-type set to 1 if the R bit is set and the Rd bit is cleared, and MUST be present at least once with domain-type set to 2 if the S bit is set and the Sd bit is cleared. 4.5. PCE-CAP-FLAGS Sub-TLV The PCE-CAP-FLAGS sub-TLV is an optional sub-TLV used to indicate PCE capabilities. It MAY be present within the PCED TLV. It MUST NOT be present more than once. If it appears more than once, only the first occurrence is processed and any others MUST be ignored. The value field of the PCE-CAP-FLAGS sub-TLV is made up of an array of units of32 bit-flags32-bit flags numbered from the most significant bit as bit zero, where each bit represents one PCE capability. The format of the PCE-CAP-FLAGS sub-TLV is as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 5 | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | // PCE Capability Flags // | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+TypeType: 5LengthLength: Multiple of 4 octetsValueValue: This contains an array of units of32 bit32-bit flags numbered from the most significant as bit zero, where each bit represents one PCE capability. IANAis requested towill manage the space of the PCE CapabilityFlagsFlags. The following bitsare to behave been assigned by IANA: Bit Capabilities 0 Path computation with GMPLS link constraints 1 Bidirectional path computation 2 Diverse path computation 3 Load-balanced path computation 4 Synchronized path computation 5 Support for multiple objective functions 6 Support for additive path constraints (max hop count, etc.) 7 Support for request prioritization 8 Support for multiple requests per message 9-31 Reserved for future assignments by IANA. These capabilities are defined in [RFC4657]. Reserved bits SHOULD be set to zero on transmission and MUST be ignored on receipt. 5. Elements of Procedure The PCED TLV is advertised within OSPFv2 Router Information LSAs (Opaque type of 4 and Opaque ID of 0) or OSPFv3 Router Information LSAs (function code of12)12), which are defined in[OSPF-CAP].[RFC4970]. As such, elements of procedure are inherited from those defined in[OSPF-CAP].[RFC4970]. InOSPFv2OSPFv2, the flooding scope is controlled by the opaque LSA type (as defined in [RFC2370]) and inOSPFv3OSPFv3, by the S1/S2 bits (as defined in [RFC2740]). If the flooding scope islocal to anarea local, then the PCED TLV MUST be carried within an OSPFv2 type 10 router information LSA or an OSPFV3 Router Information LSA with the S1 bit set and the S2 bit clear. If the flooding scope is the entire IGPdomaindomain, then the PCED TLV MUST be carried within an OSPFv2 type 11 Router Information LSA or OSPFv3 Router Information LSA with the S1 bit clear and the S2 bit set. When only the L bit of the PATH-SCOPE sub-TLV is set, the flooding scope MUST be area local. When the PCE function is deactivated, the OSPF speaker advertising this PCE MUST originate a new Router Information LSA that no longer includes the corresponding PCED TLV, provided there are other TLVs in the LSA. If there are no other TLVs in the LSA, it MUST either send an empty Router Information LSA or purge it by prematurely aging it. The PCE address (i.e., the address indicated within the PCE ADDRESS TLV) SHOULD be reachable via some prefixes advertised by OSPF.This allows the detection ofThe PCED TLV information regarding a specific PCEfailure to be sped up. When the PCE addressisno longer reachable,only considered current and useable when thePCE node has failed, has been torn down, or thererouter advertising this information isno longer IP connectivity toitself reachable via OSPF calculated paths in thePCE.same area of the LSA in which the PCED TLV appears. A change ininformationthe state of a PCE (activate, deactivate, parameter change) MUST result in a corresponding change in the PCED TLVMUST NOT trigger any SPF computation at a receiving router.information advertised by an OSPF router (inserted, removed, updated) in its LSA. The way PCEs determine the information theyadvertiseadvertise, and how that information is made available to OSPF, is out of the scope of this document. Some information may be configuredon the PCE(e.g., address, preferences, scope) and other information may be automatically determined by the PCE (e.g., areas of visibility). A change in information in the PCED TLV MUST NOT trigger any SPF computation at a receiving router. 6. Backward Compatibility The PCED TLV defined in this document does not introduce any interoperability issues. A router not supporting the PCED TLV will just silently ignore the TLV as specified in[OSPF-CAP].[RFC4970]. 7. IANA Considerations 7.1. OSPF TLV IANA has defined a registry for TLVs carried in the Router Information LSA defined in[OSPF-CAP].[RFC4970]. IANAis requested to assignhas assigned a new TLVcode-pointcodepoint for the PCED TLV carried within the Router Information LSA. Value TLV Name Reference ----- -------- ----------56 PCED (this document) 7.2. PCE Capability FlagsregistryRegistry This document provides new capability bit flags, which are present in the PCE-CAP-FLAGS TLV referenced insectionSection 4.1.5. The IANAis requested to createhas created a new top-level OSPF registry, the "PCE Capability Flags" registry, andtowill manage the space of PCE capability bit flags numbering them in the usual IETF notation starting at zero and continuing at least through 31, with the most significant bit as bit zero. New bit numbers may be allocated only by an IETF Consensus action. Each bit should be tracked with the following qualities: - Bit number - Capability Description - Defining RFC Several bits are defined in this document.Here are the suggested values:The following values have been assigned: Bit Capability Description 0 Path computation with GMPLS link constraints 1 Bidirectional path computation 2 Diverse path computation 3 Load-balanced path computation 4 Synchronized paths computation 5 Support for multiple objective functions 6 Support for additive path constraints (max hop count, etc.) 7 Support for request prioritization 8 Support for multiple requests per message 8. Security Considerations This document defines OSPF extensions for PCE discovery within an administrative domain. Hence the security of the PCE discovery relies on the security of OSPF. Mechanisms defined to ensure authenticity and integrity of OSPF LSAs [RFC2154], and their TLVs, can be used to secure the PCE Discovery information as well. OSPF provides no encryption mechanism for protecting the privacy ofLSAs, andLSAs and, inparticularparticular, the privacy of the PCE discovery information. 9. Manageability Considerations Manageability considerations for PCE Discovery are addressed in Section 4.10 of [RFC4674]. 9.1. Control of Policy and Functions Requirements for the configuration of PCE discovery parameters on PCCs and PCEs are discussed in Section 4.10.1 of [RFC4674]. In particular, a PCE implementation SHOULD allow the following parameters to be configured on the PCE: - The PCE IPv4/IPv6 address(es) (see Section4.1)4.1). - The PCE Scope, including the inter-domain functions(inter- area,(inter-area, inter-AS, inter-layer), the preferences, and whether the PCE can act as default PCE (see Section4.2)4.2). - ThePCE domainsPCE-Domains (see Section4.3)4.3). - Theneighbour PCE domainsneighbor PCE-Domains (see Section4.4)4.4). - The PCE capabilities (see Section4.5)4.5). 9.2. Information and Data Model A MIB module for PCE Discovery is defined in [PCED-MIB]. 9.3. Liveness Detection and MonitoringPCE Discovery Protocol liveness detection relies upon OSPF liveness detection.This document specifies the use of OSPFalready includesas aliveness detection mechanism (Hello protocol), andPCEdiscovery does not require additional capabilities. Procedures definedDiscovery Protocol. The requirements specified inSection 5 allow a PCCRFC 4674 include the ability todetect when adetermine liveness of the PCEhas been deactivated, or is no longer reachable.Discovery protocol. Normal operation of the OSPF protocol meets these requirements. 9.4. Verify Correct Operations The correlation of information advertised against information received can be achieved by comparing the information in the PCED TLV received by the PCC with that stored at the PCE using the PCED MIB [PCED-MIB]. The number of dropped, corrupt, and rejected information elements are available through the PCED MIB. 9.5. Requirements on Other Protocols and Functional Components The OSPF extensions defined in this document do not imply any requirement on other protocols. 9.6. Impact on Network Operations Frequent changes in PCE information advertised in the PCED TLV, may have a significant impact on OSPF and might destabilize the operation of the network by causing the PCCs to swap between PCEs. As discussed in Section 4.10.4 of [RFC4674], it MUST be possible to apply at least the following controls: - Configurable limit on the rate of announcement of changed parameters at a PCE. - Control of the impact onPCCsPCCs, such as through rate-limiting the processing of PCED TLVs. - Configurable control of triggers that cause a PCC to swap to another PCE. 10. Acknowledgments We would like to thank Lucy Wong, Adrian Farrel, Les Ginsberg, Mike Shand, and Lou Berger for their useful comments and suggestions. We would also like to thank Dave Ward, Lars Eggert, Sam Hartman,andTimPolkPolk, and Lisa Dusseault for their comments during the final stages of publication. 11. References 11.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2154] Murphy, S., Badger, M., and B. Wellington, "OSPF with Digital Signatures", RFC 2154, June 1997. [RFC2328] Moy, J., "OSPF Version 2", STD 54, RFC 2328, April 1998. [RFC2370] Coltun, R., "The OSPF Opaque LSA Option", RFC 2370, July 1998. [RFC2740] Coltun, R., Ferguson, D., and J. Moy, "OSPF for IPv6", RFC 2740, December 1999.[RFC2370] Coltun, R., "The OSPF Opaque LSA Option", RFC 2370, July 1998.[RFC3630] Katz, D.,Yeung, D.,Kompella, K., and D. Yeung, "Traffic Engineering (TE) Extensions to OSPF Version 2", RFC 3630, September 2003.[OSPF-CAP][RFC4970] Lindem, A., Ed., Shen, N., Vasseur, JP., Aggarwal, R., and S. Shaffer,S., Vasseur, J.P.,"Extensions to OSPF foradvertisingAdvertising Optional Router Capabilities",draft-ietf-ospf-cap, work in progress. [RFC2154] Murphy, S., Badger, M., and B. Wellington, "OSPF with Digital Signatures",RFC2154, June 1997.4970, July 2007. 11.2. Informative References[RFC4657] Ash, J., Le Roux, J.L., "PCE Communication Protocol Generic Requirements", RFC4657, September 2006. [PCEP] Vasseur, Le Roux, et al., "Path Computation Element (PCE) communication Protocol (PCEP) - Version 1", draft-ietf-pce-pcep, work in progress.[PCED-MIB] Stephan, E., "Definitions of Managed Objects for Path Computation Element Discovery",draft-ietf-pce-disc-mib, workWork inprogress. [PCED-ISIS]Progress, March 2007. [PCEP] Vasseur, JP., Ed., and JL. Le Roux,Vasseur, et al. "IS-IS protocol extensions for PathEd., "Path Computation Element (PCE)Discovery", draft-ietf-pce-disco- proto-isis, workcommunication Protocol (PCEP) ", Work inprogress.Progress, November 2007. [RFC4655] Farrel, A., Vasseur,J.P.,J.-P., and J. Ash,J., "Path"A Path Computation Element(PCE)-based(PCE)-Based Architecture",RFC4655,RFC 4655, August 2006. [RFC4657] Ash, J., Ed., and J. Le Roux, Ed., "Path Computation Element (PCE) Communication Protocol Generic Requirements", RFC 4657, September 2006. [RFC4674] Le Roux,J.L., et al.J., Ed., "Requirements forPCE discovery", RFC4674,Path Computation Element (PCE) Discovery", RFC 4674, October 2006.12. Editor's[RFC5089] Le Roux, J.L., Ed., Vasseur, J.P., Ed., Ikejiri, Y., and R. Zhang, "IS-IS Protocol Extensions for Path Computation Element (PCE) Discovery", RFC 5089, December 2007. Authors' Addresses Jean-Louis Le Roux (Editor) France Telecom 2, avenue Pierre-Marzin 22307 Lannion Cedex FRANCEEmail:EMail: jeanlouis.leroux@orange-ftgroup.com Jean-Philippe Vasseur (Editor) Cisco Systems, Inc. 1414 Massachusettsavenue Boxborough ,Avenue Boxborough, MA-01719 USAEmail:EMail: jpv@cisco.com13. Contributors' AddressesYuichi Ikejiri NTT Communications Corporation 1-1-6, Uchisaiwai-cho, Chiyoda-ku Tokyo 100-8019 JAPANEmail:EMail: y.ikejiri@ntt.com Raymond Zhang BTInfonet2160 E. Grand Ave. El Segundo, CA 90025 USAEmail: raymond_zhang@bt.infonet.com 14.EMail: raymond.zhang@bt.com Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual PropertyStatementThe IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.